Tig Welding Tips - 11 Filler Metals That Will Weld Darn Near Anything

Do you ever wish there was one TIG welding rod that would weld everything? Well Give up already! Its not gonna happen. But if you want to know the bare minimum arsenal of tig welding rods it takes to weld darn near anything, here is my down and dirty list. The first 5 rods are the most useful will take care of 90 percent of all your tig jobs.

1. E70S2--for welding mild steel, 4130 chromoly, and other low alloy steels
2. ER308--almost every stainless steel can be welded with this rod
3. ER309--high carbon stainless steels like 400 series, and for welding stainless to carbon steel as well as other dissimilar metal applications
4. 4043--best all around aluminum rod
5. Hastelloy W-- aka AMS 5786 is the best all purpose rod ever for all steels when you don't know exactly what kind of steel you have.
6. AZ101---The least crack sensitive welding rod for magnesium castings
7. CP TI-- also known as AMS 4951, commercially pure titanium can be used on any higher strength weldable titanium
8. SILBRO--aka Silicon Bronze ----for copper alloys and tons of other uses like copper to stainless, copper to steel, can be used for tig welding cast iron too.
9. Al BRO-- aka Aluminum Bronze----good rod for welding cast iron on A/C. Stronger than SILBRO
10. UTP 99% Alloy 59 Nickel Alloy Welding Rod from airgas -----Another great rod for welding cast iron. very machinable and crack resistant.
11. Alladin 3 in 1 or Durafix--for tig welding pot metal... welding pot metal blows, but sometimes you have to do it.

There you have it, 11 tig welding rods that let you weld practically every metal under the sun. This information is not intended to be used as a substitute for engineering data for critical welds. These are just some welding rods I have used with success. I hope it helps you.

To see more down and dirty tig welding tips along with a bunch of Down and Dirty welding tips. and a whole bunch of other welding information, visit http://www.weldingtipsandtricks.com/ Article Source: http://EzineArticles.com/?expert=Jody_Collier PC repair services in Denver, CO

How To Weld At Home: Quick Safety Tips

Safety tips that every home welder needs to know.

Arc Welding Tips, Tricks and Techniques Video

This is a preview of an 91 minute professionally produced how-to video titled "HOW TO ARC WELD - TIPS, TRICKS AND PROCEDURES". New to arc welding? Want to learn basic tips and procedures without taking expensive lessons? Have you been welding for a while but would like to learn from other more experienced welders?

(IMPORTANT: THE SIGNS AT THE BOTTOM OF THE TRAILER SAY THIS IS AN 86 MINUTE VIDEO CALLED "FILM TO VIDEO" THAT IS A MISTAKE; THIS IS A 91 MINUTE ARC WELDING DVD)

The 91 minute DVD has 22 chapters beginning with Welding Safety Tips and ending with Overhead Weld. The DVD's host is Joe Levandoski, who is full time welder with 28 years experience. Joe is certified by the State of Indiana in Arc Welding and Wire Welding.
This DVD was filmed using cameras with special lenses that allow you to actually see the welding arc and welding puddle. This should help you to better understand how to move your welding rod and maintain the proper rod-to-metal gap.
You can order this DVD through Shining Star Video Productions located in Valparaiso, Indiana. Shining Star produced this custom DVD and holds the copyright to it. To order, you can phone Shining Star at (219) 242-8663 between 8:00AM and 4:00PM CST Mon-Fri. You can also email them at dlwjugoso@yahoo.com.
The cost of the DVD is US$27.95. Shipping and handling is free anywhere in the 50 US states. For orders outside the US, please email for shipping charges.
We accept payment in Paypal, cashiers check or money order (sorry, we do not accept charge cards at this time). All orders will be shipped the next possible day after receiving payment. Thank you for looking at our preview and good luck with your welding experience